BEW/BEWX

SAFE AREA: high performance electric wire rope hoists in standard execution.

One or two lifting speeds can be obtained by the application of double polarity motor, or inverter.

They are equipped with:

  • High performance motors IP 55 S1
  • Capacity up to 32 T
  • High performance rope guide
  • Electro/mechanical or electronic load limitor
  • Up/down limit switch
  • High quality finish appropriate to destination
 

HAZARDOUS AREA: high performance electric wire rope hoists for explosion-proof execution.

The BEWX has the same basic characteristics of the BEW hoists, equipped with:

  • High performance motors IP66
  • Anticondensation heathers
  • Thermal probes
  • First quality electric control components
  • Basic hazardous area Zone 2 IIB T2/T3 up to zone 1 IIC T5 Hydrogen
  • Bronze parts where friction situation is present

MARINE/SHIP AREA: high performance electric wire rope hoists in corrosion-resistant execution.

The BEWSS & BEWXSS have the same basic characteristics of the BEW and BEWX hoists, equipped with:

  • High performance motors IP66
  • AISI stainless steel wire rope
  • AISI 316 frame and parts
  • IP66 electric components and controls

BEWS/BEWSX

SAFE AREA:  high performance electric wire rope hoists in standard execution. 

The BEWS is our electric wire rope hoist that matches customizable requirements in safe areas. BEWS hoists apply two separate motors connected by a differential gear, avoiding any need of clutch or axial movement of the rotor. The two motors with differential gear give a high reduction ratio in lifting speed (1/10 ) with the highest service rate of both motors. Two different motors gives the possibility to never stop the service of the hoist, in case of  failure of one motor.

They are equipped with:

  • High performance motors IP 55 S1
  • Capacity up to 32 T
  • High performance rope guide
  • Electro/mechanical or electronic load limitor
  • Up/down limit switch
  • High quality finish appropriate to destination  

HAZARDOUS AREA: high performance electric wire rope hoists in explosion-proof execution.

The BEWSX has the same basic characteristics of the BEWS hoists, equipped with:

  • High performance motors IP66 S1
  • Anticondensation heathers
  • Thermal probes
  • First quality electric control components
  • Basic hazardous area Zone 2 IIB T2/T3 up to Zone 1 IIC T5 Hydrogen
  • Bronze parts where friction situation is present

MARINE/SHIP AREA: high performance electric wire rope hoists in corrosion-resistant execution.

The BEWSSS & BEWSXSS have the same basic characteristics of the BEW and BEWX hoists, equipped with:

  • High performance motors IP66 S1
  • AISI stainless steel wire rope
  • AISI 316 frame and parts
  • IP66 electric components and controls
bulleng